SOLUSI ARSIP DOKUMEN DIGITAL ANDA
TL-R1620Sep-RP

Rp 65.120.000
sudah termasuk PPn 10%
Garansi produk 5 tahun

Ready Stock!

Lihat Seluruh Produk: , .

TL-R1620Sep-RP

Rp 65.120.000
sudah termasuk PPn 10%
Garansi produk 5 tahun
 Ready Stock!

Untuk Pemesanan Konfirmasi Terlebih Dahulu
● Processor : Rackmount SAS 12Gbps JBOD expansion enclosure with SAS expander
● Memory : 2.5″/3.5″ SAS 12Gbps & SAS/SATA6Gbps drives
● Slot Bay : 16-bay 3U 

SKU: TL-R1620Sep-RP. Categories: , . Tags: , , , .
Anda dapat membeli produk kami di ONLINE STORE      

The TL-R1620Sep-RP SAS 12Gb/s storage expansion enclosure is designed for expanding the storage space of your QTS or QuTS hero NAS. Up to sixteen expansion enclosures can be daisy-chained via high-speed mini SAS HD cables to support up to 4.6PB raw capacity, ideal for archiving/backing up virtualization applications, surveillance recordings, large data, or multimedia. Featuring Broadcom® SAS DataBolt™ bandwidth optimization technology, the TL-R1620Sep-RP consolidates 6Gb/s infrastructure into 12Gb/s. With four mini SAS HD SFF-8644 Wide Ports, the TL-R1620Sep-RP delivers up to 192Gbps transfer speed when connected to a single host. When connected to a QTS/QuTS hero NAS that supports multipath routing, the TL-R1620Sep-RP can achieve smoother data transmission and continuous system operation.

Note: The QNAP NAS requires QTS 4.5.1 / QuTS hero h4.5.1 (or later) with SAS ports or with a QXP PCIe SAS storage expansion card installed. Check PCIe SAS card compatibility


Achieve up to 96Gb/s with link aggregation

The TL-R1620Sep-RP is powered by a low-power 28nm SAS35x36R SAS Expander and supports 12/6 Gb/s SAS/SATA drives. Also, it has four 12 Gb/s SAS 3.0 (x4 Lane) SFF-8644 SAS Wide Ports. By connecting the TL-R1620Sep-RP to the host NAS and daisy-chaining multiple JBODs with two wide ports configured with link aggregation, the solution delivers up to 96Gb/s transfer speed.

 

 


Dual 10GbE connectivity optimizes high-speed data transfer and supports RDMA/RoCE

The TS-h1886XU-RP comes with a pre-installed dual-port 10GbE SFP+ Smart NIC (that uses the Broadcom NetXtreme®-E Series BCM57412, NVIDIA® Mellanox ConnectX®-4 Lx, or the same level SmartNIC) to improve bandwidth-demanding data center and virtualization applications and to support RDMA over Converged Ethernet (RoCE and RoCEv2), allowing data to bypass general network drivers, the socket layer, and directly enter the ESXi server and storage memory buffer. RoCE technology can improve NAS performance while lowering the CPU usage of applications that use Ethernet networks, ideal for low-latency and high-speed large data transfers. QNAP also offers numerous options of managed and unmanaged 10GbE switches, assisting organizations in implementing high-speed, secure and scalable network environments without going over budget.

Note: Broadcom® SmartNIC for RDMA support is available in QuTS hero h4.5.2.

Supports SAS DataBolt™ technology, delivers 12Gb/s speed using existing 6Gb/s infrastructure

Featuring Broadcom® SAS DataBolt™ bandwidth optimization technology, the TL-R1620Sep-RP features an intelligent data buffer for transferring data to drives at speeds that match the performance of the host NAS. Whether the TL-R1620Sep-RP uses 12Gb/s or 6Gb/s drives, the NAS host will transfer data to the TL-R1620Sep-RP at 12Gb/s, allowing you benefit from high-speed 12Gb/s SAS transmission with existing 6Gb/s infrastructure.

Note: The QNAP host NAS requires QTS 4.5.1 / QuTS hero h4.5.1 (or later) with SAS ports or with a QXP PCIe a PCIe SAS storage expansion card installed. Check PCIe SAS card compatibility

 

SPESIFIKASI

TL-R1620Sep-RP

 
Drive Bay16 x 3.5-inch SAS 12Gb/s, SAS/SATA 6Gb/s

The system is shipped without HDD.
For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility3.5-inch bays:
3.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA solid state drives
Hot-swappable 
Form Factor3U Rackmount
Host Interface4 x 12Gb/s SAS 3.0 wide ports (4-wide port) Mini-SAS HD (SFF-8644)
LED IndicatorsFront panel: HDD 1-16, Power, Status, Link, Fan error
Rear panel: SAS connector, Enclosure ID
ButtonsPower
Dimensions (HxWxD)131.3 × 482.2 × 425.3 mm
Weight (Net)11.48 kg
Weight (Gross)16.01 kg
Max. number of HDDs/SSDs supported16
Hard Drive Type3.5″ or 2.5″ SAS 12Gb/s, SAS/SATA 6Gb/s and 3Gb/s drives
Operating temperature0 – 40 °C (32°F – 104°F)
Storage Temperature-20 – 70°C (-4°F – 158°F)
Relative Humidity5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit550W(x2), 100-240V
Power Consumption: Operating Mode, Typical207.13 W

Tested with drives fully populated.
Fan3 x 80mm, 12VDC
Sound Level36 db(A)
System WarningBuzzer
ManagementManaged via QNAP QTS / QuTS hero OS
1. Supports disk S.M.A.R.T. information
2. RAID expansion enclosure identifier
3. Locate RAID expansion enclosures
4. Locate hard disks on RAID expansion enclosure
5. Smart fan control by detecting system and hard drive temperature
6. In-band SAS firmware update

 


Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
* Sound Level Test
Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.

 

 

Menu

Jual Scanner Plustek Terlengkap!

Open chat
Ada yang bisa kami bantu
Hallo!
Ada yang bisa kami bantu