Untuk Pemesanan Konfirmasi Terlebih Dahulu
● Processor : AMD Ryzen V1000 series V1500B 4C/8T 2.2GHz
● Memory : 8GB DDR4 RAM (2 x SODIMM slots, max. 64GB,optional ECC RAM support)
● Slot Bay : 6-bay NAS
The TS-673A is powered by an AMD Ryzen™ V1000 series V1500 quad-core 2.2 GHz processor with up to 64GB RAM (ECC memory is supported*) and features USB 3.2 Gen 2 ports for speeds up to 10 Gb/s. The TS-673A also provides one USB Type-C port for supporting more devices to transfer large media files across devices, providing you with a more efficient workflow.
* Using ECC memory requires the removal of pre-installed memory, as you cannot use non-ECC memory with ECC memory.
The TS-673 features two PCIe (Gen3 x4) slots, allowing for installing single/dual-port 10GbE NICs to accelerate applications that demand higher bandwidth such as virtualization, media workflows, and backup/restoration tasks for an ever-growing amount of data; or a USB 3.1 Gen2 (10Gb/s) expansion card for transferring large media files to and from USB storage. You can also install QM2 cards, wireless network cards or an entry-level graphics card to extend NAS functionality.
Note: USB 3.1 performance may vary depending on hardware/software limitations and usage environment.
» Learn More: 10GbE NAS Solution
Equipped with a next-gen AMD R-Series RX-421ND quad-core 2.1 GHz CPU (Turbo Core up to 3.4 GHz) with up to 64GB dual-channel DDR4 RAM, the TS-673 enables lightning-fast multi-tasking with low power consumption for up to 2190 MB/s throughput with a 10GbE configuration. With a hardware-accelerated AES-NI encryption engine, the TS-673 also provides unmatched encryption performance in its class (up to 2169 MB/s with AES 256-bit full NAS volume encryption) to boost system performance while ensuring the safety of sensitive business data stored on the NAS.
Upgrading your network shouldn’t break the bank, and 2.5GbE connectivity provides immediately noticeable improvements compared to standard 1GbE. QNAP offers 2.5GbE switches that supports Multi-Gigabit NBASE-T™ and allows you to use existing CAT5e cables to connect multiple computers and NAS, assisting organizations in implementing high-speed, secure and scalable network environments without going over budget.
The TS-673 supports the innovative QM2 PCIe card that allows for adding up to two M.2 SSDs. You can configure SSD caching, or create a RAID 5 tiered storage along with the two M.2 SSDs in the NAS*. As these M.2 SSDs will not occupy any 3.5-inch drive bays, the QM2 card allows you to maximize both your storage capacity and performance. There are also QM2 cards that include 10GbE 10GBASE-T connectivity to provide SSD caching with high-speed network connectivity on a single card.
*Note: M.2 SSDs for NAS and QM2 cards are sold separately.
The TS-673A also supports QuTS hero – QNAP’s ZFS-based NAS operating system. Providing end-to-end data integrity, data reduction (inline data deduplication, compression and compaction), and much more, QuTS hero uses additional system resources to ensure an optimal environment for protecting business data.
1. QTS and QuTS hero use different file systems. You must remove all the drives from the TS-673A before switching from QuTS hero to QTS.
2. QuTS hero requires a NAS with at least 8 GB memory.
3. Inline Data Deduplication requires a NAS with at least 16 GB memory (at least 32 GB memory is recommended for optimal performance).
4. It is recommended to create an SSD RAID with at least two SSDs for the QuTS hero system drive to attain optimal system performance. Please note that M.2 SSD hot-swapping is only supported by M.2 SSD slots on PCIe cards (such as the QM2). M.2 SSD slots that are built into the NAS do not support hot-swapping.
The TS-673A features 2 M.2 NVMe SSD slots for you to enjoy SSD caching or Qtier auto tiering Technology
Improve random data access speeds with an SSD cache
SSD caches accelerate IOPS performance and reduce latency for storage volumes. They are perfect for IOPS-demanding applications (including databases and virtualization) and can significantly improve overall workflows.
Maximize the value of SSDs with Qtier Technology
Qtier™ Technology empowers the TS-673A with auto tiering that helps continuously optimize storage efficiency by automatically moving data between M.2 SSDs, 2.5-inch SSDs, and high-capacity HDDs based on the data’s access frequency. Qtier™ 2.0 features IO-awareness that empowers SSD-tiered storage with a cache-like reserved space to handle burst I/O in real time, greatly maximizing the advantages of SSDs.
Note: Qtier Technology is supported by QTS
The TS-673A features two PCIe Gen 3 x4 slots that allows for various expansion cards for expanding application potential.
Note: TS-673A uses high-profile expansion cards
|CPU||AMD Ryzen™ Embedded V1500B quad-core 2.2 GHz processor|
|CPU Architecture||64-bit x86|
|Graphic Processors||Optional via a PCIe adapter|
|Floating Point Unit|
|Hardware-accelerated Transcoding||Optional via a PCIe adapter|
|System Memory||8 GB SO-DIMM DDR4 (1 x 8 GB)|
|Maximum Memory||64 GB (2 x 32 GB)|
|Memory Slot||2 x SO-DIMM DDR4|
Support ECC memory
For dual-DIMM configurations, you must use a pair of identical DDR4 modules.
|Flash Memory||5GB (Dual boot OS protection)|
|Drive Bay||6 x 3.5-inch SATA 6Gb/s, 3Gb/s|
|Drive Compatibility||3.5-inch SATA hard disk drives|
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
The following are not hot-swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots.
|M.2 SSD Slot||2 x M.2 2280 PCIe Gen3 x1 slots|
The M.2 SSD is not included as standard.
M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.
|SSD Cache Acceleration Support|
|2.5 Gigabit Ethernet Port (2.5G/1G/100M)||2|
|5 Gigabit Ethernet Port (5G/2.5G/1G/100M)||Optional via a PCIe adapter|
|10 Gigabit Ethernet Port||Optional via a PCIe adapter|
|Wake on LAN (WOL)|
Slot 1: PCIe Gen 3 x4
Slot 2: PCIe Gen 3 x4
|USB 3.2 Gen 2 (10Gbps) Port||3 x Type-A USB 3.2 Gen 2 10Gbps|
1 x Type-C USB 3.2 Gen 1 5Gbps
|IR Sensor||(QNAP RM-IR004)|
|HDMI Output||Optional via a PCIe adapter|
|LED Indicators||Status/Power, USB, LAN, Drive 1-6, M.2 SSD 1-2|
|Buttons||Power, Reset, USB Auto Copy|
|Dimensions (HxWxD)||188.2 × 264.3 × 280.8 mm|
|Weight (Net)||5.78 kg|
|Weight (Gross)||7.35 kg|
|Operating temperature||0 – 40 °C (32°F – 104°F)|
|Storage Temperature||-20 – 70°C (-4°F – 158°F)|
|Relative Humidity||5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)|
|Power Supply Unit||250W, 100-240V AC, 50-60Hz, 3.5A|
|Power Consumption: HDD Sleep Mode||21.891 W|
|Power Consumption: Operating Mode, Typical||45.898 W|
Tested with drives fully populated.
|Fan||System fan: 2 x 92mm|
CPU fan: 1 x 60mm
|Sound Level||20.3 db(A)|
|Kensington Security Slot|