Untuk Pemesanan Konfirmasi Terlebih Dahulu
● Processor : Intel® Xeon® E-2124 quad-core 3.3 GHz processor (burst up to 4.3 GHz)
● Memory : 8 GB UDIMM DDR4 (2 x 4GB)
● Slot Bay : 9-Bay NAS
The Intel® Xeon® E based TS-983XU-RP enterprise NAS with up to 64 GB DDR4 ECC (Error Correcting Code) memory delivers server-grade performance with dependable reliability. It features Mellanox® ConnectX®-4 Lx 10GbE controllers that not only fulfill bandwidth-demanding applications but also support iSER to offload CPU workloads with boosted virtualization performance, while PCIe expansion allows for installing graphics cards to empower video surveillance, virtualization and AI applications. The performance-driven TS-983XU-RP provides you with advanced business-ready features, including software-defined SSD extra over-provisioning, software-defined networking & virtual switch, and much more.
The Intel® Xeon® E based TS-983XU-RP uses ECC memory that can detect and correct single-bit memory errors as they occur to prevent downtime and data loss, which is essential for always-on, mission-critical, server-grade applications. The TS-983XU-RP supports dual-channel DDR4 memory in four Long-DIMM slots. When using paired memory modules, the TS-983XU-RP can leverage the power of dual-channel architecture to boost performance. You also customize the memory configuration (supports up to 64 GB RAM) of the TS-983XU-RP for greater performance to tackle dynamically-changing workloads such as virtualization.
The TS-983XU-RP provides two 10GbE SFP+ ports that use the Mellanox® ConnectX®-4 Lx SmartNIC controller. They support the iSCSI Extensions for RDMA (iSER) protocol, allowing data to bypass general network drivers, the socket layer, and to directly enter memory buffers of the ESXi server and storage to offload CPU workloads. When both the VMware® server and the TS-983XU-RP support iSER, it can provide up to 60% increased random read/write performance and 50% decreased latency, providing an essential tool to optimize demanding virtualization applications.
|CPU||Intel® Xeon® E-2124 quad-core 3.3 GHz processor (burst up to 4.3 GHz)|
|CPU Architecture||64-bit x86|
|Floating Point Unit|
|System Memory||8 GB UDIMM DDR4 ECC (2 x 4GB)|
|Maximum Memory||128 GB (4 x 32 GB)|
|Memory Slot||4 x Long-DIMM DDR4|
|Flash Memory||5GB (Dual boot OS protection)|
|Drive Bay||4 x 3.5-inch + 5 x 2.5-inch SATA 6Gb/s, 3Gb/s|
|Drive Compatibility||3.5-inch bays:|
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
|SSD Cache Acceleration Support|
|Gigabit Ethernet Port (RJ45)||2|
|10 Gigabit Ethernet Port||2 x 10GbE SFP+ SmartNIC port|
|Wake on LAN (WOL)|
Slot 1: PCIe Gen 3 x16
|USB 3.2 Gen 1 port||4|
|USB 3.2 Gen 2 (10Gbps) Port||2 x Type-C USB 3.2 Gen 2 10Gbps|
|Form Factor||1U Rackmount|
|LED Indicators||HDD 1-4, SSD 1-5, Status, LAN|
|Dimensions (HxWxD)||43.3 × 482.6 × 507.54 mm|
|Weight (Net)||8.63 kg|
|Operating temperature||0 – 40 °C (32°F – 104°F)|
|Storage Temperature||-20 – 70°C (-4°F – 158°F)|
|Relative Humidity||5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)|
|Power Supply Unit||300W(x2), 100-240V|
|Power Consumption: Operating Mode, Typical||84.74 W|
Tested with drives fully populated.
|Fan||System fan: 3 x 40mm, 12VDC|
|Sound Level||43.3 db(A)|
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
* Sound Level Test
Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.